Better Products. Better Care. Fora Care.

Fora Care Inc. SpO2 Pulse Oximeter FORA TN'G (TestN'Go) SpO2 Fingertip Pulse Oximeter (Bluetooth 4.0)
  • Fora Care Inc. SpO2 Pulse Oximeter FORA TN'G (TestN'Go) SpO2 Fingertip Pulse Oximeter (Bluetooth 4.0)
  • Fora Care Inc. SpO2 Pulse Oximeter FORA TN'G (TestN'Go) SpO2 Fingertip Pulse Oximeter (Bluetooth 4.0)
FORA TN'G (TestN'Go) SpO2 Fingertip Pulse Oximeter (Bluetooth 4.0) - is currently on backorder. You may still purchase now though and we'll ship as soon as more become available.

Product Features:

  • Large LCD Display 
  • Bluetooth Indicator 
  • Easy to use with one button
  • SpO2, Pulse Rate and Pulse Bar
  • 2 AAA Batteries  

Package Contents:

  • FORA Fingertip Pulse Oximeter*1
  • Operating Instructions
  • AAA-Size Alkaline Batteries*2
  • Warranty Card

Model No. TN'G SpO2
Dimension & Weight 63(H)x37(W)x32(D) mm, 40g without batteries
Display LCD
Battery Life Batteries can be used continuously for 8 hours (for reference only ,
it depends on different brands of AAA alkaline batteries)
Power Source Two 1.5V AAA alkaline batteries
External Output 0% to 100%
Resolution 1%
Accuracy 100% ~ 80% ±2%; 79% ~ 70% ±3%; others are undefined.
Method Dual wavelength LED

 

Pulse Rate
Measurement Range

30 to 250bpm

Resolution 1bpm
Accuracy ±1bpm or ±1%, whichever is greater
Operating Conditions 50°F to 104°F (10°C to 40°C); Below 95% R.H. (non-condensing)
Meter Storage / Transportation Conditions -13°F to 158°F (-25°C to 70°C); Below 95% R.H. (non-condensing)
Product Life Time 12 months

 

Classification
Type BF Applied part Type BF Applied part
Safety IEC60601-1
EMC IEC60601-1-2
Harmonized Standard ISO 80601-2-61:2011
Water-resistance IP22
Mode of Operation Spot Check / Monitoring

Q: How to operate the TN’G SpO2 device:

STEP 1. Turn on the oximeter by pressing . Do not move your finger when starting test. Do not move your body while testing.

STEP 2. Open the clamp and put one of your fingers into rubber hole of the oximeter (it is better to let your finger touch the bottom.) before releasing the clamp.

STEP 3. After detecting the pulse signal, the oximeter shows the readings of SpO2 and pulse rate on the display. The readings will be updated based on the signal received with each pulse.

STEP 4. While testing, if you press , the screen will rotate 180 degrees.